• Simulates #22AWG (0.7mm) PIC unshielded twisted-pair (UTP) telephone transmission line

• Selectable attenuations levels 0dB to -48dB @ 772kHz (1.544Mb/s) in 1dB steps and from 0dB to -55.7dB @ 1024kHz (2.048Mb/s) in 1.16dB steps

• Selectable line impedance: 100W , 120W , or 75W BALUN

• Accurate over a 3 decade frequency range, from 10kHz to 10MHz

• Convenient front panel controls and displays, calibrated in kFeet, Meters, and dB of Attenuation at 772/1024kHz

• Remote control of all functions via standard RS-232 port

• Accepts standard BNC, Bantam, and 310 connectors

Compatibility

• US and European AMI-PCM codes:

  T1 - 1.544Mb/s

  T1C - 3.152Mb/s

  T2 - 6.312Mb/s

  CEPT - 2.048Mb/s

  CEPT - 8.448Mb/s

• ISDN Primary rate standards, 1.544Mb/s and 2.048Mb/s

• Japan's CMI code standard, 2.048Mb/s

• Manchester coded data from 100kb/s to 10Mb/s

• Design and evaluation of serial data receivers and repeaters

• Replaces 11kft (3.3km) of transmission line in laboratory experiments

• Allows automated testing of telecommunications, PBX, and LAN equipment

General Description

The ME-1001 Line Simulator is a highly accurate, programmable filter designed to simulate the attenuation versus frequency characteristics of the #22AWG (0.7mm) unshielded twisted-pair transmission wire commonly used in long distance telephone trunk lines in the US and around the world. The same wire is also found in office buildings and industrial complexes where it forms the backbone of PBX and LAN communication systems. By simulating 11kft (3.3km) of transmission line in 230ft (70m) increments, the ME-1001 offers a convenient and practical method of developing and testing communications equipment intended for use on this wire.

Easy to use front panel controls set the ME-1001's simulated line length displayed in kFeet, Meters, or dB of Attenuation at either 772kHz for 1.544Mb/s applications or 1024kHz for 2.048Mb/s applications. Input and output line terminations are also user-selectable to correctly match the characteristic impedances of either 100W or 120W twisted-pair wire systems. A 75W BALUN connection is also provided. All ME-1001 functions can be computer controlled via a standard RS-232 serial port for automated test applications. Options include 19" rack mount chassis, battery back-up, and an internal noise mixer.

 

Terminating Impedance .............. 100W/120W/75W, ±5%

 

Recommended Frequency Range ........ 10kHz to 10MHz

 

Maximum Balanced Input Voltage,

Zero to Peak ..................................................... ±6V

 

Maximum Balanced DC Input Current,

Input Center-Tap to Output Center-Tap .. 70mA

Sourcing Impedance ................... 100W/120W/75W, ±5%

Maximum Rise/Fall Time At 0dB,

V_IN = 3V_PEAK ......................................... < 40nsec

 

Maximum Overshoot At 0dB,

V_IN = 3V_PEAK ............................................. < 10%

 

Short Circuit Tolerance ................................. Continuous

Attenuation range at f_o with display setting:

f_o = 772kHz ............................ 0dB to -48.0dB

f_o = 1024kHz .......................... 0dB to -55.7dB

Frequency dependent attenuation simulates that of #22AWG (0.7mm) unshielded twisted-pair wire at 20ºC. The following indicates the relative attenuation (A_R) verses frequency normalized at f_o =772kHz.

The attenuation at any frequency, A(f), can be calculated as a function of the attenuation setting at f_o=772kHz as follows:

A(f) = A_R(f) X A(f_o)

Attenuation adjustment step size with display setting:

f_o = 772kHz ............................................ 1.00dB

f_o = 1024kHz (Displayed to nearest 0.1dB) ... 1.16dB

CLICK ON GRAPH TO ENLARGE

Attenuation tolerance at f_o with display setting:

f_o = 772kHz ......................................... ± 0.25dB

f_o = 1024kHz ....................................... ± 0.30dB

Attenuation tolerance at all other frequencies relative to f_o is given by the following graph:

CLICK ON GRAPH TO ENLARGE

 

Power input voltage:

Option A ....................................... 105V to 130V

Option B ........................................ 210V to 250V

Option J ........................................... 90V to 110V

Power input frequency ............................. 45Hz to 66Hz

Power consumption ................................................ 10W

Dimensions (w x h x d in inches) ............... 17 x 3.5 x 14

Weight ..................................................................... 13 lbs

Storage temperature ................................ -40°C to 85°C